x check current draw! 44mA - seems totally fine and chill

x waning gibbous on faceplate has a little tiny piece o crud on it

... star shapes for the weekdays - doing it for the indicators now, not the weekdays 


x metal backing just below mood to block light leak

moving upper jacks so its easier to plug in 2 stackables? does it matter?


x smaller holes for the power header in the board - imprecision there also contributes to light mask misalignment

//

get rid of solder mask on back of panel (!)

remove order numbers


// MAYBE 

perhaps moon phases on backside of the panel in copper, surroudned by fr4

and/or putting some metal backings on weekdays that make them more perfect circley